• Priced from $5.00
Small Solderless Breadboard
Small breadboard perfect for your electronic prototyping needs!
  • Priced from $6.00
Pre-formed 140-piece Jumper Wire Kit
  • Priced from $45.00
Raspberry Pi 3 Model B+
  • Priced from $10.00
Resistor Kit
Values Included: 0Ω, 1.5Ω, 4.7Ω, 10Ω, 47Ω 100Ω, 220Ω, 330Ω, 470Ω, 680Ω 1kΩ, 2.2kΩ, 3.3kΩ, 4.7kΩ, 10kΩ 22kΩ, 47kΩ, 100kΩ, 330kΩ, 1MΩ
  • Priced from $10.00
Arduino Micro
$10.00 $12.00
  • Priced from $1.00
TIP120 NPN Power Darlington Transistor
The TIP 120 is a NPN darlington transistor with a current gain of 1000 that is a good choice for interfacing many higher current or higher voltage loads to an Arduino or other microcontroller. It can be used to control DC motors, solenoids or strings of LEDs with minimal current draw from the microcontroller.
  • Priced from $12.00
Soldering Iron - 30 W
  • Priced from $12.00
Pi Model A+ Case
  • Priced from $35.00
Raspberry Pi 3 Model A+
  • Priced from $15.00
12V Power Supply 6A
Replacement for 5050, 3528 LED lightning strip Widely used on LED lightning strip Input: 100v~240v, 50-60Hz Output: 12V, 6A Watt: 72W Weight: 12.9oz
  • Priced from $5.00
Alligator Clips
Made from 100% real alligator.
  • Priced from $20.00
GPS Reciever
The GP-20U7 is a compact GPS receiver with a built-in high performances all-in-one GPS chipset. The GP-20U7 accurately provides position, velocity, and time readings as well possessing high sensitivity and tracking capabilities. Thanks to the low power consumption this receiver requires, the GP-20U7 is ideal for portable applications such as tablet PCs, smart phones, and other devices requiring positioning capability. This 56-channel GPS module, that supports a standard NMEA-0183 and uBlox 7 protocol, has low power consumption of 40mA@3.3V (max), an antenna on board, and -162dBm tracking sensitivity. With 56 channels in search mode and 22 channels “all-in-view” tracking, the GP-20U7 is quite the work horse for its size.